| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Newbie Q - 45 degree angle in binding http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=4816 |
Page 1 of 1 |
| Author: | DennisR [ Mon Jan 30, 2006 12:02 am ] |
| Post subject: | |
So I have 2 pieces of white boltron coming together at 90 degrees. HOw to get those nice 45 degree cuts? Thanks |
|
| Author: | crazymanmichael [ Mon Jan 30, 2006 12:06 am ] |
| Post subject: | |
use the polished back of your chisel as a mirror during the set up of your cut--it will tell you when the chisel is the right angle. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|