| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Grover Tuner Bushing Question http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=5157 |
Page 1 of 1 |
| Author: | LarryH [ Sat Feb 18, 2006 2:53 am ] |
| Post subject: | |
I want to install my Grover tuners today and can find a 11/32" hole size needed and 'press fit' bushings that are a larger diameter but no size specs for the bushings that I can find. Are the bushings meant to be pressed into the smaller, tuner sized holes, or enlarged to a larger, mysterious for now, sized hole? Thanks Larry EDIT - Oh and I can find the specs from StewMac as tuner size .248" and bushing size .344" but only the tuner sized hole of 11/32" is referenced. |
|
| Author: | LarryH [ Sat Feb 18, 2006 3:15 am ] |
| Post subject: | |
OK - Did I just figure this out? The 11/32" hole IS the bushing size? And the tuner post rotates through the over sized hole? Larry |
|
| Author: | LarryH [ Sat Feb 18, 2006 4:37 am ] |
| Post subject: | |
Thanks Hesh |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|