| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Shop Built Thickness Sander in ShopNotes http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=5421 |
Page 1 of 1 |
| Author: | hoosierukes [ Fri Mar 03, 2006 1:53 am ] |
| Post subject: | |
I just picked up the current issue of ShopNotes. This issue features a nicely designed shop built thickness sander. It's only obvious drawback is that it is mounted on your tablesaw and uses the arbor for power. It would be a simple matter to bild a stand and mount a motor beneath. It's a good reference for anyone considering the project. Current ShopNotes 
|
|
| Author: | Bruce Dickey [ Fri Mar 03, 2006 4:02 am ] |
| Post subject: | |
Nifty Mr. Davis. The clear hood threw me there for a second. I thought, "Gee that looks dangerous," thinking it was open. I agree, a guy wouldn't want to tie up a table saw. |
|
| Author: | Don A [ Fri Mar 03, 2006 10:23 am ] |
| Post subject: | |
There is also a nice article on brazing broken band saw blades for those that might be interested. Looks rather simple and inexpensive. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|