Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

My latest jig(couple of piccys)
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=5455		 Page 1 of 1
Author:  Serge Poirier [ Sun Mar 05, 2006 3:57 am ]
Post subject: 
here's a rosette cutter jig i attempted making for the last few days, it's a rosette cutter inspired from the latest threads and hopefully, it's gonna help me with that daunting task!

Here it is





















I did a couple test runs with it and it was easy to swivel around but it needs a few adjustments and i'll need to buy some more stuff for my dremel like an adapter for smaller bits. Looks promising so far!

Thanks for lookin'
Author:  Serge Poirier [ Sun Mar 05, 2006 5:01 am ]
Post subject: 
Thanks Hesh,

if Lance wants it there, he can certainly add it but i think he would need permission from one major sponsor for copyright reasons Let's just say i took a picture from the internet, printed it out, took some measuments on the pic and applied the rule of 3 for real time measures to help me build this. If anyone needs more instructions, they can PM me and i'll be glad to help.

The plexiglass was easy to cut either with my jigsaw and my 9" Mastercraft bandsaw, even my dull blade was up to the challenge. I''l post the results ASA the adjustments are made!

Thanks
Author:  Shane Neifer [ Sun Mar 05, 2006 2:11 pm ]
Post subject: 
HEY SERGE!!! She's "lookin' Good!!" Keep it up, can't wait to see it finished!

Shane
Author:  Serge Poirier [ Mon Mar 06, 2006 1:34 am ]
Post subject: 
I'm not really good in math but i remembered that old trick from college, lets say on paper you measure 3 inches and you know for fact that this 3 inches equals 7 inches in reality. another measurement on paper gives you 1.8 inches so all you need is the rule of 3: if    3.0 inches = 7 inches
1.8 = x?

1.8 x7/3 = x inches, if that makes any sense
Author:  Serge Poirier [ Mon Mar 06, 2006 4:55 pm ]
Post subject: 
Here are 2 more pics of the jig which still needs refinement and i'll be all set for the week end!



Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/