Thanks Mr.Presnall, that would be greatly appreciated.
Ross
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Profiles for X braces and tone bars http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=5853 |
Page 1 of 1 |
| Author: | Rossy [ Mon Mar 27, 2006 9:01 pm ] |
| Post subject: | |
Hey guys, Do any of you have profiles for x-braces and tone bars. I'm trying to build a 14 series size Taylor. Thanks. Ross |
|
| Author: | FrankC [ Tue Mar 28, 2006 1:13 am ] |
| Post subject: | |
I wanted to bump this as I would be interested in the same |
|
| Author: | Steve Saville [ Tue Mar 28, 2006 1:15 am ] |
| Post subject: | |
I believe that the OLF plan of the SJ is very close to a Taylor 14. |
|
| Author: | L. Presnall [ Tue Mar 28, 2006 1:26 am ] |
| Post subject: | |
Also check Taylor's site in the Reference section...it may be "Tech Sheets"...I'm not quite sure where, but they have PDF files with illustrations of the bracing for 12, 14, jumbo, and dread Taylors. |
|
| Author: | Joe Beaver [ Tue Mar 28, 2006 2:58 am ] |
| Post subject: | |
[QUOTE=L. Presnall] Also check Taylor's site in the Reference section...it may be "Tech Sheets"...I'm not quite sure where, but they have PDF files with illustrations of the bracing for 12, 14, jumbo, and dread Taylors.[/QUOTE] I'd like to see those PDF's. If anyone can find them please post a http. That would be wonderful. |
|
| Author: | FrankC [ Tue Mar 28, 2006 4:54 am ] |
| Post subject: | |
Here i sthe best I could find...Just shows the layout, not profile: Taylor bracing |
|
| Author: | L. Presnall [ Tue Mar 28, 2006 5:14 am ] |
| Post subject: | |
Man, I just threw a copy of the thing away cleaning the shop...I'll look and see if I have another in the house...the link FrankC posted is good, but not the one I had from several years back... |
|
| Author: | Rossy [ Tue Mar 28, 2006 5:27 am ] |
| Post subject: | |
Thanks Mr.Presnall, that would be greatly appreciated. Ross
|
|
| Author: | Rossy [ Tue Mar 28, 2006 5:35 am ] |
| Post subject: | |
By the way. You wouldn't happen to have the bracing layout as well would you? Just thought I'd ask. Thanks. R |
|
| Author: | L. Presnall [ Tue Mar 28, 2006 6:15 am ] |
| Post subject: | |
I think they're on the same printout...I'll look around for it...and call me "Larry"! 
|
|
| Author: | FrankC [ Tue Mar 28, 2006 6:26 am ] |
| Post subject: | |
If you find them larry, can I get a copy? |
|
| Author: | RCoates [ Tue Mar 28, 2006 12:19 pm ] |
| Post subject: | |
I too would be interested in any information on Taylor bracing specs... Pic from frets.com Not sure were this came from. Credit to the artist. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|