| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| fretboard radiusing jigs http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=5899 |
Page 1 of 1 |
| Author: | Bruce Dickey [ Thu Mar 30, 2006 1:12 pm ] |
| Post subject: | |
I thought this rendition of ToddStock, copied from a jig by Marty McClary post on MIMF 2002. I was hoping Todd would show us some pics of the inside of the jig, exploded view. I really like this one Todd. The McClary version is similar but apparently lacks the chute where you are sliding the fretboard blank? Am I seeing a carrier board which keeps the fretboard in position? Double sided tape? Thanks for reviewing this jig for us, bd. 
|
|
| Author: | Serge Poirier [ Thu Mar 30, 2006 2:08 pm ] |
| Post subject: | |
I'd really like to know more about this jig too, it doesn't seem to take a lot of room, is there any measurements relative as to how to build this that's available Bruce or Todd? |
|
| Author: | Brock Poling [ Thu Mar 30, 2006 2:20 pm ] |
| Post subject: | |
This is similar to Craig Holden's jig. You really should check out what he has going on. It is really slick. I have one and love it. |
|
| Author: | Serge Poirier [ Thu Mar 30, 2006 2:34 pm ] |
| Post subject: | |
Thanks guys! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|