| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Calling all CNC guys... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=5938 |
Page 1 of 1 |
| Author: | dgalas [ Mon Apr 03, 2006 6:28 am ] |
| Post subject: | |
Hey all, I was just wondering if any of you CNC guys would be willing to hire out a little time to make a couple templates for jigs. I am looking for a couple radius templates out of say hardboard, plexiglass, whatever that I can use to pattern-route some guides to make dishes. I know I can use the mathematical method of laying it out, but after using a bendy stick it won't end up a true section of a circle, and the long string approach is just too sloppy for my liking. So I thought I would drop in on you precision guys! Let me know. Thanks! |
|
| Author: | PaddyD [ Mon Apr 03, 2006 10:35 am ] |
| Post subject: | |
i would talk to john watkins, as it will be cheaper for you on shipping |
|
| Author: | Jason [ Mon Apr 03, 2006 5:36 pm ] |
| Post subject: | |
You could always order a radius dish and cut it in half. When your done just glue it back together |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|