Waverley specs should be available at stewmac.com
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Hey OLF guitar guys- How much room? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=6025 |
Page 1 of 1 |
| Author: | clavin [ Fri Apr 07, 2006 8:41 am ] |
| Post subject: | |
Hi Guys- How much space do I have from the outer edge of the tuner hole until the end of the washers? I need to know for the inlay placement. Let me know ASAP O.K? Thanks! Craig Lavin www.handcraftinlay.com |
|
| Author: | Michael Dale Payne [ Fri Apr 07, 2006 8:48 am ] |
| Post subject: | |
I believe you are speeking of the OLF build #1 andI am not sure what tuners are going on it but a good rule of thumb is 1/8" but this varies from maker to maker |
|
| Author: | Bruce Dickey [ Fri Apr 07, 2006 9:01 am ] |
| Post subject: | |
Waverley specs should be available at stewmac.com
|
|
| Author: | Bruce Dickey [ Fri Apr 07, 2006 9:07 am ] |
| Post subject: | |
Craig, no washers, bushings. I'd say you need one in hand. Someone got a measurement?  |
|
| Author: | Rod True [ Fri Apr 07, 2006 9:36 am ] |
| Post subject: | |
That's a cool pic there Bruce, who's build is it? |
|
| Author: | clavin [ Fri Apr 07, 2006 10:23 am ] |
| Post subject: | |
Get it here asap!   
Too many people posting cool inlays images. I need to get another up soon! Craig L. |
|
| Author: | Bruce Dickey [ Fri Apr 07, 2006 11:31 am ] |
| Post subject: | |
Sorry, they are in Morral Ohio, I bet someone can measure one for you Craig. Look above at the bushing. That pic came from the detals section on StewMacs website under Waverleys. So notice that the nut looking bushing is a press fit. The nut looking portion over hangs the press in bushing which is tapered .331 to .348. You do not have a round edge to deal with, you have a hexagon to deal with there Craig. |
|
| Author: | Brock Poling [ Fri Apr 07, 2006 12:54 pm ] |
| Post subject: | |
What kind of tuners are we using. I have a couple of sets of most major types of tuners laying around. I can measure them. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|