| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| transverse brace hole http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=6455 |
Page 1 of 1 |
| Author: | Rossy [ Mon May 01, 2006 1:13 pm ] |
| Post subject: | |
Hi guys, I was just wondering how far from the bottom should that hole be in the transverse brace. Thanks again for the info. Ross |
|
| Author: | Pwoolson [ Mon May 01, 2006 1:17 pm ] |
| Post subject: | |
You'll want to have it in a straight line with the truss rod nut. If you can't get an allen wrench in there, it's pretty much pointless to have the hole. |
|
| Author: | Rossy [ Mon May 01, 2006 1:24 pm ] |
| Post subject: | |
Thanks Paul. Makes sense. Ross |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|