Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

Jap Maple Leaf Project

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

Michael Dale Payne

Post subject:

Posted: Thu Jan 13, 2005 8:31 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

Here are renderings of the guitar that I had all of you vote on the rosette for. The conscience was that the basic design may have been too busy. So I toke the divided ring out and replaced with a solid ring. I had to stay with Mahogany on the leaves because the contrast between the Acacia was not enough. I have not added bracing to the model yet so the wood you see inside the sound hole is the back showing through the hole. The woods used are taken from photos of the actual wood to be used. Some tint adjustment still to be made Neck not shown yet (just the fretboard)

Woods
b/s: Black acacia
top: bear clawed Caucasian Spruce
binding: Rosewood

I know I posted this in string below.....did not mean too

Top

Jeff Doty

Post subject:

Posted: Thu Jan 13, 2005 8:36 am

Koa

Joined: Wed Dec 29, 2004 3:24 am
Posts: 731
Location: United States

Michael,

That is going to be a gorgeous guitar. Is this a commission? Or are you just doing it for your own joy?

Jeff

Top

Michael Dale Payne

Post subject:

Posted: Thu Jan 13, 2005 8:41 am

Old Growth Brazilian

Joined: Tue Dec 28, 2004 1:56 am
Posts: 10707
Location: United States

[QUOTE=Jeff Doty] Michael,

That is going to be a gorgeous guitar. Is this a commission? Or are you just doing it for your own joy?

Jeff[/QUOTE] Nope, It is mine I did a Koa top with IRW back and side a couple years ago. It had Paua for the leaves and MOP vot the stems. no leaves at the sound hole The material used on this one is from a commisin that got canceled before I even got startedMichaelP38365.7018981481

Top

Dickey

Post subject:

Posted: Thu Jan 13, 2005 2:50 pm

Brazilian Rosewood

Joined: Wed Dec 29, 2004 5:10 am
Posts: 2020
Location: Argentina

Michael, this is truly marvelous technology. You are quite good at it too. The pic on the far right looks like a photo of a finished guitar, and almost is. Thanks for sharing.

Top

LanceK

Post subject:

Posted: Fri Jan 14, 2005 4:19 am

Site Admin

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro

Michael, that is just killer!
Thanks for sharing

Lance

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com

Top

Steve Kinnaird

Post subject:

Posted: Fri Jan 14, 2005 2:31 pm

Contributing Member

Joined: Wed Jan 05, 2005 3:45 pm
Posts: 4337
Location: United States

That looks perfect. This committee approach paid off, didn't it? Nice, nice job.

_________________
From Nacogdoches...the oldest town in Texas.

http://www.stephenkinnaird.com

Top

Page 1 of 1

[ 6 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 70 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: