Here are renderings of the guitar that I had all of you vote on the rosette for. The conscience was that the basic design may have been too busy. So I toke the divided ring out and replaced with a solid ring. I had to stay with Mahogany on the leaves because the contrast between the Acacia was not enough. I have not added bracing to the model yet so the wood you see inside the sound hole is the back showing through the hole. The woods used are taken from photos of the actual wood to be used. Some tint adjustment still to be made Neck not shown yet (just the fretboard)
Woods
b/s: Black acacia
top: bear clawed Caucasian Spruce
binding: Rosewood
I know I posted this in string below.....did not mean too
