| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Another Ziricote source question http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=7074 |
Page 1 of 1 |
| Author: | James Orr [ Sat Jun 10, 2006 4:51 pm ] |
| Post subject: | |
But this time for veneer. I've checked the three sources I've purchased from in the past (Certainly Wood, Crown, and Herzog), but can't find Ziricote. Does anyone know of a veneer source? I'd like to use it for the faceplate of the amp I'm about to complete. I need it to be so thin because I need some threads available for the potentiometer bolts. It will be backed by the maple veneer and the aluminum chasis. |
|
| Author: | Serge Poirier [ Sat Jun 10, 2006 5:53 pm ] |
| Post subject: | |
James, you might want to try Lee Valley for very thin supply, i know they even have wenge in their boxes of mixed veneers, in case you can't find any. |
|
| Author: | Mattia Valente [ Sat Jun 10, 2006 7:09 pm ] |
| Post subject: | |
Wenge's hardly rare or similar looking to Ziricote, though, is it? |
|
| Author: | Brad Goodman [ Sat Jun 10, 2006 10:50 pm ] |
| Post subject: | |
James, I have lots of thin ziricote that can be made into any thickness veneer-I pm'd you. Brad |
|
| Author: | James Orr [ Sun Jun 11, 2006 6:17 am ] |
| Post subject: | |
Thanks guys. Brad contacted me and let me know he could help me out. Thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|