Hello all,
I'm in the process of designing my steel string head stock and I'm wondering what length (nut to tip
) and width you guys use.
Thanks!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Head Stock size? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=7094 |
Page 1 of 1 |
| Author: | Graham Steward [ Mon Jun 12, 2006 5:30 am ] |
| Post subject: | |
Hello all, I'm in the process of designing my steel string head stock and I'm wondering what length (nut to tip ) and width you guys use.
Thanks! |
|
| Author: | Michael Dale Payne [ Mon Jun 12, 2006 6:13 am ] |
| Post subject: | |
Mine is 6 1/4 x 3 
|
|
| Author: | Mattia Valente [ Mon Jun 12, 2006 6:28 am ] |
| Post subject: | |
Mine's a bit bigger, for my acoustics: 7.25" long, 3.75" wide at the wides. My electrics (also 3+3 tuner layout) have between a 5.5" and 5.7" long, 3.125" wide. |
|
| Author: | Graham Steward [ Mon Jun 12, 2006 9:57 am ] |
| Post subject: | |
Thanks guys that really helps. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|