| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Pick Guard for L-00 http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=713 |
Page 1 of 1 |
| Author: | crowduck [ Fri Jan 14, 2005 12:07 pm ] |
| Post subject: | |
Looking for a pick guard for my new Johnson L-Style (like a Nick Lucas Special Gibson L-00). LMI & StewMac have some inexpensive Martin dreadnought type, but I think that might be too big since the waist of the L-Style is rather narrow. Anyone have any recommendations of what to use? This top is smaller than a 000, and has a really narrow waist. LMI has some other choices, but are more expensive in the $20 to $30 range. The guitar was only $149, so I don't want spend a lot. Is it that hard to make one myself? Chris Nielsen Soquel, CA. |
|
| Author: | LanceK [ Fri Jan 14, 2005 12:41 pm ] |
| Post subject: | |
HI Chris, You can buy a sheet of Clear Self Adhesive Pickguard Material from stewmac and cut your own. GO HERE |
|
| Author: | crowduck [ Fri Jan 14, 2005 2:02 pm ] |
| Post subject: | |
Lance, Thanks for the input. I am hoping I can find one of those tortoise or black Martin style pickguards that will fit. Or find a source for the tortoise material that is cheap. LMI has a tortoise material, but it is about $30. Regards, Chris |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|