| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Follow up question..... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=7158 |
Page 1 of 1 |
| Author: | Jordan Bunte [ Fri Jun 16, 2006 9:21 am ] |
| Post subject: | |
Hello again. To follow up with the whole router question, I thought I'd ask where you get your bits. I'm looking specifically for pattern cutting bits (w/ bearing obviously) to make molds, jigs, and route things like end grafts, mortise/tenon, truss rod channel. Again...what brands do you like? Where do you get them? Price? Thanks! Jordan |
|
| Author: | Michael Shaw [ Fri Jun 16, 2006 10:27 am ] |
| Post subject: | |
I get mine from grizzly and CMT. Good stuff Grizzly CMT |
|
| Author: | Mark Tripp [ Fri Jun 16, 2006 11:15 am ] |
| Post subject: | |
I get Amana bits from the guy who sharpens my jointer blades and table saw blades. He swears by them, and I've found them to be the best quality bits I've used. A little more expensive than most though. There are several online sources... -Mark |
|
| Author: | L. Presnall [ Fri Jun 16, 2006 12:07 pm ] |
| Post subject: | |
http://www.mlcswoodworking.com/ The least expensive quality bits I've found....we're talking carbide, well machined and the whole "bit"...don't sharpen....at these prices you toss 'em and buy again! |
|
| Author: | Mattia Valente [ Fri Jun 16, 2006 12:09 pm ] |
| Post subject: | |
Whiteside from http://www.routerbits.com, and I've heard very good things about http://www.infinitytools.com |
|
| Author: | Miketobey [ Fri Jun 16, 2006 12:20 pm ] |
| Post subject: | |
Eagle-America has quality at competitive prices too.MT |
|
| Author: | A Peebels [ Fri Jun 16, 2006 3:45 pm ] |
| Post subject: | |
Don't forget the BORG. They carry medium quality bits with either top or bottom guide bearings. Al |
|
| Author: | Michael Shaw [ Fri Jun 16, 2006 5:08 pm ] |
| Post subject: | |
The Borg? I quess since Star Trek went off the air they had to look for another business other then assimilating species. |
|
| Author: | crazymanmichael [ Fri Jun 16, 2006 11:16 pm ] |
| Post subject: | |
for anumber of years i have bought most of my bits from woodline; good prices, good quality and good service. |
|
| Author: | TonyKarol [ Sat Jun 17, 2006 12:42 am ] |
| Post subject: | |
Lee Valley .... or the wood shows |
|
| Author: | Mattia Valente [ Sat Jun 17, 2006 8:47 am ] |
| Post subject: | |
That's Big Orange Retail Giant, innit? Either way, same outcome... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|