Official Luthiers Forum!

Well you are all wondering where is the Thinline photo shoot. Well I thought I would do a quick buff out before The shoot and I will be darn if I did not burn through on the edge of the peghead pretty bad. In fact almost all of the treble side edge pealed off. I have done the repair and am waiting for cure to sand and buff. It should be done tonight so I will string it back up and get the shoot done. as it turned out the client had to go out of town anyway so no issue on delivery

Yep, I was wondering. It's an ongoing adventure with this one, isn't it? Looks like it's going to be worth it, though.

Some of our projects have lots of unexpected and sudden delays...Hang in there Michael, it's almost over, the rewards of hard labor are coming your way!

Bummer...sorry to hear that. I know you'll get it fixed just fine.

Stuff like that happens...and will always happen. All you can do is allow yourself some more time in your build schedule for those events. And don't beat yourself up over it. Stuff like that is inevitable. Don't let it eat you up on the inside.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."

I hate it when that happens!! I have a classical that I am spraying the back on again just cause of that same reason!!

There was never a panic just a load Thuuuubbbbb!!!!!