| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Rubber SHeeting http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=738 |
Page 1 of 1 |
| Author: | russ [ Mon Jan 17, 2005 3:49 am ] |
| Post subject: | |
The time has come to replace the rubber sheeting I am using in my vacuum clamping jig, and I was wondering if any of you fine gentlepeople have ordered sheeting from McMaster, and if so, could you please provide the part number? I am hoping it is cheaper thru McMaster than from LMI!! 
|
|
| Author: | Brock Poling [ Mon Jan 17, 2005 3:59 am ] |
| Post subject: | |
8611K21 It is Latex/Natural Rubber in 42" sheets, sold by the foot. I recently saw some stuff at Veneer Supplies that I thought looked like it might work as well, but I didn't investigate it closely. |
|
| Author: | russ [ Mon Jan 17, 2005 4:11 am ] |
| Post subject: | |
Brock, Thanks for the tip! I'll take a look and add a few feet to my next order. I was thinking about ordering the "gum rubber", but wasn't sure it would hold up. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|