| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Bridge Pins http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=7618 |
Page 1 of 1 |
| Author: | gibson355 [ Thu Jul 20, 2006 11:58 pm ] |
| Post subject: | |
Does anyone know where I can find Ebony bridge pins with Black MOP dots? Cheers, Richard |
|
| Author: | Pwoolson [ Fri Jul 21, 2006 12:07 am ] |
| Post subject: | |
I'm pretty sure Gurian has them but you'll have to buy a lot. |
|
| Author: | gibson355 [ Fri Jul 21, 2006 12:47 am ] |
| Post subject: | |
HThanks Hesh.... but I think I'm missing something.... I'm looking for a black MOP dot... I see lots with white MOP or Paua... but none with Black MOP... |
|
| Author: | Michael Dale Payne [ Fri Jul 21, 2006 12:53 am ] |
| Post subject: | |
You could get non-dot pins and inlay 2 or 3mm dots your self. Andy DePaule could probably provide the dots. I am about to do some Snakewood pins with Extra Blue Paua dots |
|
| Author: | Alain Desforges [ Fri Jul 21, 2006 12:56 am ] |
| Post subject: | |
You can always buy them plain Jane and then inlay the black MOP yourself. I did this with my Black horn pins. Get the 2mm bradpoint bit and matching shell dots. I got mine from LMI. Edit: I just browsed through the LMI site. It seems they don't have black MOP dots... I guess you'll have to source them somewhere else... Hope this helps. |
|
| Author: | Michael Dale Payne [ Fri Jul 21, 2006 1:15 am ] |
| Post subject: | |
I am afraid you may have a hard time finding pre-shapped Black MOP dots in stock anywhere! If so I am pretty sure Andy DePaule can have them made up. It may take a couple weeks to get them. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|