| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Could spruce be used for b/s also? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=7847 |
Page 1 of 1 |
| Author: | Philip Perdue [ Thu Aug 03, 2006 11:51 am ] |
| Post subject: | |
I have run across some unmatched spruce tops at a very cheap price. The size of the tops would work as either top, back or sides for a ukulele. It may be an uneducated question, but could you use the spruce tops for all sides of the ukulele? The thought had never occurred to me until I found this deal. Could the spruce be bent for he sides? Thanks Philip |
|
| Author: | Shane Neifer [ Thu Aug 03, 2006 1:31 pm ] |
| Post subject: | |
Another one of our members, Mike Collins, is just about to put togther two all Lutz Spruce Flamenco's. Didn't Torres use paper mache on an experimental guitar? David Webber, a Vancouver guitarmaker, has a guitar with oriented strand board (chip board) back and sides. Sounds wonderful!! Shane |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|