Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Need source for carbon fiber bars
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=7890		 Page 1 of 1
Author:  Dave Rector [ Mon Aug 07, 2006 6:29 am ]
Post subject: 
Anyone know of a source for carbon fiber bar stock for neck reinforcement? I tried Los Alamos isnce they are a sponsor but they were out of most sizes and said it will be a month or so before they could fill my order.

I found some .125x.325 bars for around $15.00 for a 4' length. Would two of these be enough to stiffen things up pretty well? I've never used them before so I don't have a clue what I'm looking for.

Any help would be appreciated.
Author:  Pwoolson [ Mon Aug 07, 2006 6:31 am ]
Post subject: 
try Aerospace Composites.
Author:  Dave Rector [ Mon Aug 07, 2006 6:36 am ]
Post subject: 
Thanks Paul!
Author:  JBreault [ Mon Aug 07, 2006 6:41 am ]
Post subject: 
FYI, according to Charlie Fleishman there is a two month waiting list on carbon fibre because the US military has bought up all the stock.
Author:  Jim Watts [ Mon Aug 07, 2006 6:53 am ]
Post subject: 
[QUOTE=JBreault] FYI, according to Charlie Fleishman there is a two month waiting list on carbon fibre because the US military has bought up all the stock. [/QUOTE]
Not sure who Charlie Fleishman is, but this would explain why I'm having a very difficult time getting vendors of raw materials to even return my calls. I recently had one vendor tell me that they just won't deal with us because we're too small.
It's tough for us right now and hope people can hang in there with us untill we get through it.
Thanks,
Jim
Author:  CarltonM [ Mon Aug 07, 2006 8:44 am ]
Post subject: 
Jim, that's really unfortunate. It's tough for small businesses anyway, and now raw materials are short! Too bad you can't find a way to get a Defense contract.

Dave,

Both LMI and Stew-Mac carry reinforcement bars.
Author:  Dave Rector [ Mon Aug 07, 2006 9:51 am ]
Post subject: 
Carlton, I saw the bars that Stew Mac and LMI carry. But after looking at Jim's prices they seemed a little high. Okay, I'm cheap.
Author:  Kim [ Mon Aug 07, 2006 11:25 am ]
Post subject: 
[QUOTE=Jim_W]
It's tough for us right now and hope people can hang in there with us untill we get through it.
Thanks,
Jim[/QUOTE]

I'll hang in there Jim The courteous and considerate approach taken by your Daughter Rebecca when contacting me to inform of a delay has left me completely at ease in the knowledge that you guys are good honest people doing what you can to get the job done.

We all hit an unpredictable hump now and then, why just imagine how the poor guy felt who built all the crates they were gonna use to ship them WMD's back from Iraq

Cheers mate.

Kim
Author:  RCoates [ Mon Aug 07, 2006 12:08 pm ]
Post subject: 
I tried Los Alamos first (and will next time as well), but for the same reasons bought here...



DragonPlate
Author:  Dave Rector [ Mon Aug 07, 2006 3:43 pm ]
Post subject: 
Thanks Ronn, best prices I've seen so far!
Author:  burbank [ Tue Aug 08, 2006 12:55 am ]
Post subject: 
Hmmm....... carbon fiber bars - sounds like some new high-tech energy snack
Author:  JBreault [ Tue Aug 08, 2006 1:37 am ]
Post subject: 
You know what? I meant Harry Fleishman. I think I got him and Charlie Hoffman mixed up.
Author:  CarltonM [ Tue Aug 08, 2006 3:05 am ]
Post subject: 
[QUOTE=RCoates]DragonPlate[/QUOTE]
Heh...they've also got carbon fiber cup coasters and mouse pads!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/