Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Bracing
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=799		 Page 1 of 1
Author:  rhcjr [ Sat Jan 22, 2005 5:06 am ]
Post subject: 
Can anyone tell me where I can get top and back
bracing details for a D35 Martin?
Author:  Jeff Doty [ Sat Jan 22, 2005 3:26 pm ]
Post subject: 
Hello,

John Hall here on the forum, might have some ideas for you, check with him. Check out his website too.

Jeff
Author:  Dickey [ Sat Jan 22, 2005 4:13 pm ]
Post subject: 
I think the back is about the same as a D28, but the bracing for the top is lighter 1/4 inch instead of 5/16 inch. Do you have any bracing pattern at the moment? I have a buddy with a D35, maybe I could get a feel inside for ya, if need be. bd
Author:  Don Williams [ Sat Jan 22, 2005 4:15 pm ]
Post subject: 
RHC, please use your real name or some likeness of it. We all consider that to be a good practice around here....thanks.! There's a lot of supply places with plans for Martin D-28's and such. LMI, StewMac, etc etc. John Hall may have a plan for that for sure.
Author:  Dickey [ Sat Jan 22, 2005 4:26 pm ]
Post subject: 
Profile: rhcjr
Username: rhcjr
Group: Forum Newbie
Account Status: Active
Online Status: Offline
Real Name: Robert Colson
Joined: 22 January 2005
Last Visit: 22 January 2005
Posts: 1 [1.00 posts per day]
Country / Location: United States
Date of Birth: 24 August 1947
Your Web Site Address: Not Given
Occupation: Design and drafting of precast concrete
Interests: wood working

Welcome Robert, where ya out of? I'm in Arkansas. You can read about many of us in the Luthier's Bios. We'd be delighted to see your face up there with ours. All you have to do is type up a simple bio and email that along with a picture of yourself.


Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/