| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Securing truss rods http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=8086 |
Page 1 of 1 |
| Author: | Andy Zimmerman [ Sun Aug 20, 2006 7:31 am ] |
| Post subject: | |
A question. I use the Allied lutherie dual action truss rods. I access them through the soundhole. Do most of you do anything th secure them or just place them in the slot. I have put some silicone caulk at one end to prevent rattle, but I am curious what other do TIA |
|
| Author: | A Peebels [ Sun Aug 20, 2006 8:38 am ] |
| Post subject: | |
I try to avoid anything with silicon. I use shoo goo. It's a rubber like glue that sticks to everything it smells like it's acetone solvent based. I don't think it contains silicone they sell it at Ace Hardware and at the Borg. Al |
|
| Author: | peterm [ Sun Aug 20, 2006 12:33 pm ] |
| Post subject: | |
I rout the slot to the same diameter and just place the rod in the slot, then put a strip of wood to cover the slot and thats it! |
|
| Author: | Andy Zimmerman [ Sun Aug 20, 2006 1:38 pm ] |
| Post subject: | |
Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|