Bob, you got our full support buddy, if it can make ya feel better, go ahead and post, you might even be able to get close to my prolific numbers!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| measurements for sides at top of box http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=8143 |
Page 1 of 1 |
| Author: | bob J [ Thu Aug 24, 2006 2:51 am ] |
| Post subject: | |
My Martin measurements are, for 000/OM, 000 12 fret are 4 1/8" for box at bottom but list no measurement at top for any of the three. What is proper measurement at top end? I appologize for so many posts today but I think, in reaction to the news of surgery, that my Bi-Polar malady, my brain chemicals have decided to handle the news in the hypo-manic mode, so, in order to avoid p---- anyone off, I am giving my keyboard to my neighbor until I come down a bit. |
|
| Author: | Michael Dale Payne [ Thu Aug 24, 2006 3:01 am ] |
| Post subject: | |
My OM is 3 13/16 at ub amd 4 1/4 at lb I believe Martin is 3 7/8 at ub and 4 1/8 at lb |
|
| Author: | Serge Poirier [ Thu Aug 24, 2006 3:53 am ] |
| Post subject: | |
Bob, you got our full support buddy, if it can make ya feel better, go ahead and post, you might even be able to get close to my prolific numbers!
|
|
| Author: | Colin S [ Thu Aug 24, 2006 4:57 am ] |
| Post subject: | |
My Martin OOO is 4 1/8" at the tail and 3 3/4" at the head. My Martin OM is 4 1/8" and 3 7/8". Both of these are from the 30s when Martin sizes were variable to say the least, but they are the sizes I use when building 12-fret OOOs and 14-fret OMs respectively. Colin |
|
| Author: | bob J [ Sat Aug 26, 2006 3:32 am ] |
| Post subject: | |
Thanks to the three of you. As always, just what I needed to know. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|