Official Luthiers Forum! • View topic

Board index » Forum Archive

All times are UTC - 5 hours

The Right thickness???

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

WalterK

Post subject:

Posted: Thu Jan 27, 2005 7:19 am

Koa

Joined: Sat Jan 15, 2005 7:24 am
Posts: 830
Location: United States

Hi Folks,
Here is a simple question and I need some opinions!!
What would be the proper thickness for a Dred. Indian Rosewood Back??
I'm practicing and learning some skills and need help.
Thanks.

Top

HankMauel

Post subject:

Posted: Thu Jan 27, 2005 7:53 am

Cocobolo

Joined: Wed Jan 05, 2005 4:23 am
Posts: 267
Location: United States

If you're new at this, I'd stay in the .085 to .090" range for both back and sides. If you want it to really "cook", take them down to .065 to .070" and brace the back with light braces, say approx .250" wide at the base by .625" tall. The lighter the weight, the less damping of the sound. BUT...you need to be careful as ripples can appear in the sides when bent.

Top

Page 1 of 1

[ 2 posts ]

Board index » Forum Archive

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 35 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: