Hey Lance, I used Shane's purflings in my rosette. I used the .02 black
double length and the koa.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| IN NEED OF http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=9016 |
Page 1 of 1 |
| Author: | LanceK [ Thu Oct 26, 2006 5:26 am ] |
| Post subject: | |
Hi Folks, I am in need of some Koa Purflings. Preferably with a .010 black fiber strip on each side, so it would be b/koa/b but I could work with out it. Anyone out there got this? If so what thickness? Thanks! |
|
| Author: | John How [ Thu Oct 26, 2006 5:37 am ] |
| Post subject: | |
How thick are the purfs, will they be wide enough to tell they are Koa? |
|
| Author: | LanceK [ Thu Oct 26, 2006 5:41 am ] |
| Post subject: | |
preferably around 028”, so I suspect you'll be able to tell? |
|
| Author: | Shane Neifer [ Thu Oct 26, 2006 5:50 am ] |
| Post subject: | |
Lance, I have some Koa purfs, I think they are .024 but I am not near them right now to tell. I black fibre lines also. Just need to see if I have .010. I know that I do have .020. I will in a while and let you know. Shane |
|
| Author: | LanceK [ Thu Oct 26, 2006 6:06 am ] |
| Post subject: | |
Thanks Shane! |
|
| Author: | Shane Neifer [ Thu Oct 26, 2006 8:10 am ] |
| Post subject: | |
Lance, The Koa is indeed .024. The only black fibre I have right now are .030 in the purf dimensions and then I have .020 double length purfs by .250 wide so you would have to trim them with a knife but you could get double lenght purfs three per strip. I do have some EIR purfs that are a dark purple. They are about .022. If any of this helps you can just PM me with your wishes. Thanks lance Shane |
|
| Author: | James Orr [ Thu Oct 26, 2006 8:26 am ] |
| Post subject: | |
Hey Lance, I used Shane's purflings in my rosette. I used the .02 black double length and the koa.
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|