I say let's send it to John Watkins....
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| My problem -OLF #2 http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=9230 |
Page 1 of 1 |
| Author: | John How [ Thu Nov 09, 2006 5:59 am ] |
| Post subject: | |
I seem to have just acquired a backlog of orders that will take me thru the next several months to complete and I am finding it difficult to find time to work on the OLF #2 neck. I am just wondering in the interest of getting this moving again, if anyone else may be interested in doing the neck. I have not done anything but laminate the block so you won't be finishing anything someone else started. I will ship the guitar and the neck blank to you if you have the time to finish this thing. Sorry for the inconvenience this may cause. |
|
| Author: | James Neunder [ Tue Nov 14, 2006 10:54 pm ] |
| Post subject: | |
Bump, not qualified, but enjoyed reading about the effort in the OLF Build #2 Forum. I'm sure there is someone with the skills, time, and big heart necessary here on the OLF to git'er-done. Congrats on the fine guitar you just completed, it's awesome. |
|
| Author: | Don Williams [ Tue Nov 14, 2006 11:31 pm ] |
| Post subject: | |
I say let's send it to John Watkins....
|
|
| Author: | John Watkins [ Tue Nov 14, 2006 11:50 pm ] |
| Post subject: | |
I'll do it. |
|
| Author: | Kim [ Tue Nov 14, 2006 11:55 pm ] |
| Post subject: | |
[QUOTE=John Watkins] I'll do it. [/QUOTE] Your middle name isn't Nike by any chance is it John.  Very kind of you to jump in so quick with the offer mate.
Cheers Kim |
|
| Author: | John How [ Wed Nov 15, 2006 1:06 am ] |
| Post subject: | |
John, T really appreciate that, I'll get this thing boxed up and on the was asap. John |
|
| Author: | Michael Dale Payne [ Wed Nov 15, 2006 1:50 am ] |
| Post subject: | |
|
|
| Author: | Don Williams [ Wed Nov 15, 2006 1:59 am ] |
| Post subject: | |
John, you're The Man. I was saying that mainly in jest because you have such a great new cnc service...didn't think you'd take it to heart. Coolness! Hey let me put in a plug for John's cnc necks and neckblocks etc. while we're at it....great products at great prices folks... |
|
| Author: | Michael Dale Payne [ Wed Nov 15, 2006 2:09 am ] |
| Post subject: | |
One thing that needs to be brought ups is will we still have a bolt down FB extension. If not then I need for the neck to be fitted but not glued down if possible so that I can finish the body separate from the neck. I believe the neck block for a bolt-able FB extension is already in the guitar. |
|
| Author: | John Watkins [ Wed Nov 15, 2006 2:47 am ] |
| Post subject: | |
Just tell what I need to do. I haven't been following the project. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|