Now why would you need those
Call LMI, they should be able to cut them for you if they still have any. I bought some wide white scrap cut offs last time I was out there. You are welcome to some of my stash of white if you can't find ivoroid.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Need - Custom Ivorid & Tortise Bindings http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=9252 |
Page 1 of 1 |
| Author: | Brock Poling [ Fri Nov 10, 2006 2:15 pm ] |
| Post subject: | |
I need to find stock of Ivorid and Tortise bindings in 1/2" (or so) height. Anybody know where I could find such a thing? |
|
| Author: | Tim McKnight [ Fri Nov 10, 2006 2:20 pm ] |
| Post subject: | |
Now why would you need those Call LMI, they should be able to cut them for you if they still have any. I bought some wide white scrap cut offs last time I was out there. You are welcome to some of my stash of white if you can't find ivoroid.
|
|
| Author: | Brock Poling [ Fri Nov 10, 2006 2:27 pm ] |
| Post subject: | |
[QUOTE=Tim McKnight] Now why would you need those [/QUOTE]
Arched plates....
Thanks for the offer... I may have to take you up on it if I strike out. |
|
| Author: | Brad Goodman [ Fri Nov 10, 2006 2:39 pm ] |
| Post subject: | |
Brock, axinc.net has ivoroid 3/4" wide in a couple different thicknesses. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|