Don, Thanks for the heads-up!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| For those building a drum sander http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=977 |
Page 1 of 1 |
| Author: | Don A [ Sun Feb 06, 2005 11:31 am ] |
| Post subject: | |
I thought I'd post this listing I found on ebay for you folks who have been talking about building a drum/thickness sander. Performax 22-44 kit These units retail for about $379 and are designed to be attached to a radial arm saw. However, I'm sure it could be adapted to be used otherwise. Just thought someone might at least be interested in the drum alone. |
|
| Author: | Darin Spayd [ Sun Feb 06, 2005 3:09 pm ] |
| Post subject: | |
Don, Thanks for the heads-up!
|
|
| Author: | Roy O [ Sun Feb 06, 2005 4:38 pm ] |
| Post subject: | |
I just met a luthier last week that had one of those. He said it was ok but the arm flexed a little. He felt his old home built one was more accruate. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|