| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| New!!! Neck angle fixture http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=9895 |
Page 1 of 1 |
| Author: | Michael Dale Payne [ Tue Dec 19, 2006 3:11 am ] |
| Post subject: | |
For those of you that have a bad case of TAS and just can't find a new tool to relieve the weight on your wallet, you could always add this to your collection. New from Luthier Tools Neck Angle, Mortise & Tenon fixture combo Hum having picture posting issues  back later
OK here they are 
Lot more to this to see. Like the mortise and tenon templates and much more. Nice but is also a pretty penney |
|
| Author: | Dave-SKG [ Tue Dec 19, 2006 3:24 am ] |
| Post subject: | |
What's the cost? |
|
| Author: | charliewood [ Tue Dec 19, 2006 3:24 am ] |
| Post subject: | |
Its not big enough! 
Sure looks like it would do the trick though eh? Cheers Charliewood |
|
| Author: | Michael Dale Payne [ Tue Dec 19, 2006 3:26 am ] |
| Post subject: | |
[QUOTE=Dave-SKG] What's the cost?[/QUOTE] $850
|
|
| Author: | Don Williams [ Tue Dec 19, 2006 3:28 am ] |
| Post subject: | |
Whoa! Great jig, but I can't afford it... |
|
| Author: | JJ Donohue [ Tue Dec 19, 2006 4:06 am ] |
| Post subject: | |
Does it do anything different than the Woolson/Fox jig? The plans are available for around $25 and it's simple to build. |
|
| Author: | Michael Dale Payne [ Tue Dec 19, 2006 4:53 am ] |
| Post subject: | |
Not really just compact and made from machined aluminum |
|
| Author: | Greg [ Tue Dec 19, 2006 11:37 am ] |
| Post subject: | |
Looks kind of complicated. |
|
| Author: | Rod True [ Tue Dec 19, 2006 1:06 pm ] |
| Post subject: | |
I'm going to get me the Woolson/Fox plans and make my own, now if $ were no object???? |
|
| Author: | JJ Donohue [ Tue Dec 19, 2006 1:26 pm ] |
| Post subject: | |
Rod...I recently completed the jig. It works like a charm. Paul's design is great and Michael's plans are clear and easy to follow. |
|
| Author: | Rod True [ Tue Dec 19, 2006 2:53 pm ] |
| Post subject: | |
Cool, thanks JJ. Just ordered the plans.  |
|
| Author: | Michael Lloyd [ Wed Dec 20, 2006 4:39 pm ] |
| Post subject: | |
How can I get a copy of the Woolson/Fox plans? |
|
| Author: | JJ Donohue [ Wed Dec 20, 2006 4:49 pm ] |
| Post subject: | |
Check out the library of plans at the top of the page. |
|
| Author: | Rod True [ Wed Dec 20, 2006 5:33 pm ] |
| Post subject: | |
Welcome to the OLF Michael, another Canuck. We're coming in hords now boys 
Where are you from Michael? |
|
| Author: | Michael Lloyd [ Thu Dec 21, 2006 2:31 pm ] |
| Post subject: | |
Hi and thank you. I'm from the Toronto area and have been building for about 3 years now with my 5th guitar almost finished. I must say the hardest part so far is the neck joint in my mind anyway. I like the dovetail joint for the neck and that's why the interest in the jig. How about yourself? |
|
| Author: | Michael Lloyd [ Thu Dec 21, 2006 2:38 pm ] |
| Post subject: | |
Thanks JJ. Plans ordered, can't wait to build it. |
|
| Author: | Rod True [ Thu Dec 21, 2006 7:10 pm ] |
| Post subject: | |
[QUOTE=mlloyd] How about yourself?[/QUOTE] I'm from the Vancouver area. Been trying to build for the last 4-1/2 years also working on my 5th and 6th. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|