| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Lining Clamps Came Today http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10102&t=9963 |
Page 1 of 1 |
| Author: | Grant Goltz [ Fri Dec 22, 2006 12:50 pm ] |
| Post subject: | |
Fed Ex dropped off my lining clamps today. They look really great. Thanks, John. One thing that I noticed, though, is that they seem to be a bit weak on clamping power. Noticeably weaker than the mini spring clamps from Home Depot that I have not been happy with. So just for a trial, I removed the rubber band from one and put it on another to double up the band. Waaaay better 
Any chance, John, that I can buy another 50 of the rubbere bands? Thanks. Grant |
|
| Author: | Kim [ Fri Dec 22, 2006 1:05 pm ] |
| Post subject: | |
Hey Grant, I am not sure, but I think you can just cut some of your own easy enough from some surgical rubber tubing. Cheers and Merry Xmas Kim |
|
| Author: | Grant Goltz [ Sat Dec 23, 2006 3:42 am ] |
| Post subject: | |
[QUOTE=larkim] Hey Grant, I am not sure, but I think you can just cut some of your own easy enough from some surgical rubber tubing. Cheers and Merry Xmas Kim[/QUOTE] Kim, Probably true enough, but in the woods of northern Minnesota, surgical tubing is not a "hardware store" item. By the time I search this out and figure out the correct diameter, wall thickness, etc., and then find some place that will ship me a couple of feet of it...... Well, just a whole lot simpler to buy it from the source who obviously has it on hand and understands what I need. Grant |
|
| Author: | John Watkins [ Sun Dec 24, 2006 1:32 am ] |
| Post subject: | |
Grant, no problem. I'm going to start a separate thread about this so that everyone will see it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|