| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Finishing Options on Plywood http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10104&t=17753 |
Page 1 of 1 |
| Author: | Terence Kennedy [ Thu Jun 26, 2008 10:19 am ] |
| Post subject: | Finishing Options on Plywood |
Greetings, I'm ready to finish a Beard roundneck kit. Neck's no problem but the plywood body has rather unattractive grain on the veneer, plus I accidently sanded through the thin outer veneer in a few places truing up the sides for binding and scraping the binding. It takes stain unevenly and looks bad. You guys ever just use a primer (like that shellac based white B.I.N stuff Zinsser makes) to cover the grain and spray color coats and clear over that? Any suggestions would be appreciated. Terry |
|
| Author: | Dean [ Thu Jun 26, 2008 3:09 pm ] |
| Post subject: | Re: Finishing Options on Plywood |
Use the zinsser seal coat shellac and ad some universal pigment in the color wanted. Add as much as you want until you achieve the opacity required ( try it on a sample). Then go to your standard finish schedule. |
|
| Author: | Terence Kennedy [ Fri Jun 27, 2008 7:18 pm ] |
| Post subject: | Re: Finishing Options on Plywood |
Thanks Dean! Terry |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|