| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| I need advice and some information http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10104&t=31937 |
Page 1 of 1 |
| Author: | kenjeffs [ Fri Apr 22, 2011 2:31 pm ] |
| Post subject: | I need advice and some information |
I am planning to convert my 71 OMI Dobro from a round neck to a square one. I have two parts to this posting. Part One: The scale most often used in resonator construction (based on my limited experience) is 25". However my round neck is based on a 24.4" scale. Question: Does anyone have the dimensions of an early 70's model 60 squareneck? I would like to know the scale along with the fretboard width at the nut and body joint. Part Two: I know that screws below the location inserts secure the fretboard to the top. Any suggestions for removing them? Thank you any information you can give me. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|