| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| roundneck, spider bridge neck angle http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10104&t=38854 |
Page 1 of 1 |
| Author: | weslewis [ Wed Jan 09, 2013 6:14 pm ] |
| Post subject: | roundneck, spider bridge neck angle |
How are you guys building in the correct neck angle ??? |
|
| Author: | Mike Dotson [ Sat Jan 12, 2013 6:38 pm ] |
| Post subject: | Re: roundneck, spider bridge neck angle |
It's not much different than a regular guitar, a straightedge laid across the fretted neck should just clear the top of the saddle slot. |
|
| Author: | Freeman [ Thu Jan 24, 2013 1:06 pm ] |
| Post subject: | Re: roundneck, spider bridge neck angle |
weslewis wrote: How are you guys building in the correct neck angle ??? Adjust it by shimming the neck stick. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|