Official Luthiers Forum!

Check it out! He's even got an arcade joystick and buttons in there. It's all tricked out!

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."

Dad...

When can *I* play on the CNC machine!!!.....

Hehehehehe...

That's pretty cool, they don't stay that clean long :P...

I have an flight sim joystick on mine, but I moved to a portable keyboard, I've been looking at this lately:

Shuttle Pro

I like the T tracks running length wise, mine run the other way, it works but can be a pain at times...

Very nice machine he has there...

-Paul-

_________________
-Paul-

Patriot Guitars

I'm going to do something similar with all the buttons and joystick, but it will mount underneath the unit and pull out on a set of drawer glides.
( yeah I know, I like using those )

I will probably house the Gecko stuff seperately in a box with a fan or two, and some good filters to keep the dust out.

I'm probably only going to have T-tracks on one half of my rig. It will have the gantry running the long direction, so it will be wide rather than deep. I plan to have a space in the front on one side where I can mount a body for doing end grafts, and also to mount a neck for cutting dovetails and tenons. Most of the jigs and such will be used on the other half of the unit.

_________________
"I want to know what kind of pickups Vince Gill uses in his Tele, because if I had those, as good of a player as I am, I'm sure I could make it sound like that.
Only badly."

That's a cool setup..! Can you play old school nintendo on that thing or what?

The Z axis looks a little short to me though...no way I could fit a duck decoy under there!   

_________________
http://www.PeakeGuitars.com