I run the 892 on my K2 CNC and it has done well for me. I have done every thing I can think of to try to ruin the thing, but it keeps ticking...!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| OPINIONS ON ROUTERS PORTER CABLE HITACHI ETC http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=18220 |
Page 1 of 1 |
| Author: | pfour415 [ Sat Aug 02, 2008 2:14 pm ] |
| Post subject: | OPINIONS ON ROUTERS PORTER CABLE HITACHI ETC |
I would like to hear any opinions/experience you guys have on routers. I am going to order a router mount so I have a backup to my columbo spindle. I currently have a few porter cable routers I use for hand routing chores (a 690 and a 892) but was thinking of picking up one of the hitachi m12's as a dedicated cnc router. They have a pretty impressive db rating (quiet is always nice). Ever since pc moved production to mexico (my 892 is mim) the quality seems to have dropped a bit. The milwaukee routers have also gotten some good reviews. I am looking in the 2.25hp range, so any other experiences with other brands are appreciated. thanks |
|
| Author: | Sheldon Dingwall [ Sat Aug 02, 2008 2:54 pm ] |
| Post subject: | Re: OPINIONS ON ROUTERS PORTER CABLE HITACHI ETC |
I have two PC's a 690 and a 7518. They are pretty unimpressive in my books. I have two Milwaukee 5625-20's. They are a lot smoother running, have way less runnout and are slightly quieter than the PC's. They seem to need bearing replacement more often than the PC's though. I run them pretty hard YMMV. I don't have any experience with Hitachi other than their 14.4 v drill. It's one of my least favorite drills. |
|
| Author: | npalen [ Sat Aug 02, 2008 9:10 pm ] |
| Post subject: | Re: OPINIONS ON ROUTERS PORTER CABLE HITACHI ETC |
Send me the Colombo and I will send you several Bosch 1617EVS's. |
|
| Author: | WaddyThomson [ Sun Aug 03, 2008 12:11 am ] |
| Post subject: | Re: OPINIONS ON ROUTERS PORTER CABLE HITACHI ETC |
I'm no expert, but, in my opinion, Hitachi is not what I would call a high end tool. I rank them with Ridgid, sort of a step down from the higher end tools, but reasonable quality. |
|
| Author: | Parser [ Sun Aug 03, 2008 4:20 pm ] |
| Post subject: | Re: OPINIONS ON ROUTERS PORTER CABLE HITACHI ETC |
I run the 892 on my K2 CNC and it has done well for me. I have done every thing I can think of to try to ruin the thing, but it keeps ticking...!
|
|
| Author: | Brad Way [ Sun Aug 03, 2008 4:45 pm ] |
| Post subject: | Re: OPINIONS ON ROUTERS PORTER CABLE HITACHI ETC |
I have owned a few routers over the years and would recommend sticking with Porter Cable. The Porter Cable routers have been around for a long time and are almost universal. If you want to buy a router lift or any other attachments you will find the PC routers are easy to fit. Just a something to think about. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|