| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| CHEAP CAM SOFTWARE http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=22672 |
Page 1 of 1 |
| Author: | npalen [ Mon Jun 08, 2009 2:36 pm ] |
| Post subject: | CHEAP CAM SOFTWARE |
http://download-cheap-software.getpack. ... l_5.08.php What's the catch on this? |
|
| Author: | Bob Garrish [ Tue Jun 09, 2009 9:10 am ] |
| Post subject: | Re: CHEAP CAM SOFTWARE |
Legality |
|
| Author: | npalen [ Tue Jun 09, 2009 1:32 pm ] |
| Post subject: | Re: CHEAP CAM SOFTWARE |
Ya, it probably falls under the category of "If it sounds too good............" They claim to supply the serial number as required to activate the software. How does that work? |
|
| Author: | Jim Watts [ Tue Jun 09, 2009 2:54 pm ] |
| Post subject: | Re: CHEAP CAM SOFTWARE |
Nelson, It sure is tempting huh? I see they have catia or UG's NX for about $60! Artcam would be interesting to try and they also have mastercam. It seems they most anything you'd want! If you try something let me know how it works out. |
|
| Author: | Bob Garrish [ Tue Jun 09, 2009 3:25 pm ] |
| Post subject: | Re: CHEAP CAM SOFTWARE |
There are a load of such sites. They're all just charging to download a pirated copy of software. For what it's worth, they're probably 'legit' in that you will be able to download your software...but the developer will never see a penny from it and if you call them for support you'll get a C&D letter pronto. If the software doesn't 'phone home' then you can install 10,000 copies with the same serial number. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|