| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Vacuum tape http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=22841 |
Page 1 of 1 |
| Author: | GCote [ Tue Jun 23, 2009 3:17 pm ] |
| Post subject: | Vacuum tape |
A few years ago I bought one of the venturi setups from Woodcraft. It was made by a company called Rousseau. It came with a roll of vacuum tape about 3/8" wide x almosx as high. It worked great. I bought some of the tape from Veneer supplies and I can't get anything to clamp with that. But when I use my old jigs with the old tape it works great. Anyone know where I can get somethng like I discribed above? Thanks Gary |
|
| Author: | npalen [ Tue Jun 23, 2009 10:31 pm ] |
| Post subject: | Re: Vacuum tape |
Michael C. Murphy > All*Star Adhesive Products, Inc. > 800.878.7827 x 203 > fax: 401.247.7711 > www.AllStarAdhesives.com http://www.allstaradhesives.com/ Gary These folks may be able to help you. Michael is very good about answering questions Nelson |
|
| Author: | Jim Watts [ Wed Jun 24, 2009 12:01 am ] |
| Post subject: | Re: Vacuum tape |
I've bought vacuum tape from Allstar also. Good stuff. More often than not though, I gut a groove of .085 deep by .125 wide and use a closed cell neoprene cord stock as a seal. Parts then suck down flush against the fixture and still hold securely. Just suggesting an alternative. |
|
| Author: | Bob Garrish [ Wed Jun 24, 2009 12:49 am ] |
| Post subject: | Re: Vacuum tape |
+1 on both of those. I use stuff from Allstart and put it in grooves. |
|
| Author: | GCote [ Wed Jun 24, 2009 6:24 pm ] |
| Post subject: | Re: Vacuum tape |
Ok thanks for the lead... I will give them a call.. Gary |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|