Official Luthiers Forum! • View topic

Board index » CNC and Lutherie

All times are UTC - 5 hours

Looking for Drive Belts

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

Shane Neifer

Post subject: Looking for Drive Belts

Posted: Tue Sep 08, 2009 4:11 pm

Brazilian Rosewood

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada

Dudes!

So I have started playing my CNC machine and as a result have opened everything up and I really need to replace the belts! Once that is done the machine should be running SMMMOOOOOOTTHHHHH! Anyway, I found and ordered all of the "XL 037" belts for the servos and pulleys but I can't seem to find the main drive belt for the "X" axis. Any idea where a guy can look for these belts? They are about 1 inch wide and 65 inches long and are timing belts ( duh

).

Thanks in advance...I have a few feelers out but should always remember that this is the first place to ask!

Thanks

Shane

_________________
Canada

Top

devincox

Post subject: Re: Looking for Drive Belts

Posted: Tue Sep 08, 2009 5:31 pm

Mahogany

Joined: Thu Jul 23, 2009 4:54 pm
Posts: 96
First name: Devin
Last Name: Cox
City: Edmond
State: Oklahoma
Country: usa
Focus: Build
Status: Amateur

These guys have a pretty good selection.
https://sdp-si.com/eStore/

Devin

Top

Shane Neifer

Post subject: Re: Looking for Drive Belts

Posted: Tue Sep 08, 2009 5:49 pm

Brazilian Rosewood

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada

devincox wrote:

These guys have a pretty good selection.
https://sdp-si.com/eStore/

Devin

Thanks Devon! They were so close! I will actually call them tomorrow (I am on the west coast so they are closed now). They don't list my belt which I believe is a .200 XL pitch, 60 grooves per inch but is 1 inch wide.

Thanks
Shane

_________________
Canada

Top

devincox

Post subject: Re: Looking for Drive Belts

Posted: Tue Sep 08, 2009 5:57 pm

Mahogany

Joined: Thu Jul 23, 2009 4:54 pm
Posts: 96
First name: Devin
Last Name: Cox
City: Edmond
State: Oklahoma
Country: usa
Focus: Build
Status: Amateur

No problem. I was actually looking for some belts for my new cnc and then saw this post.
I hope they can help.

Devin

Top

Page 1 of 1

[ 4 posts ]

Board index » CNC and Lutherie

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: