Have to warn you though, Jon, pretty gnarly bunch around here!
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| New to the forum (and lutherie), skilled with CNC http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=25076 |
Page 1 of 1 |
| Author: | jtCNC [ Thu Dec 17, 2009 9:17 am ] |
| Post subject: | New to the forum (and lutherie), skilled with CNC |
Hi, I've introduced myself in the main guitar building forum as a beginner luthier and I'd like to say hello here as well. My career is cnc programming/setting up with backgrounds in fixturing, custom machine building, cutting and hand tool making, as well as other relevant handiness. My personal shop is still a ways from being up and running, but I want to get my feet a little damp while reading up on the experiences of this community. Since I know I will likely be asking many typical amateur questions on woodworking, finishing and the like, I will gladly offer everything I've learned to date about cnc manufacturing and procedures to any and all who are interested. I'm sure the learning experience I get building my first few guitars will be an eye opener and hopefully some of you won't mind throwing me a piece of advice here and there. Jon |
|
| Author: | Ziegenfuss [ Thu Dec 17, 2009 10:09 am ] |
| Post subject: | Re: New to the forum (and lutherie), skilled with CNC |
Good to meet you man... There are a great many of us who will benefit from you joining us...There is also a very cool community of other CNC guys here. Stephen |
|
| Author: | npalen [ Thu Dec 17, 2009 2:21 pm ] |
| Post subject: | Re: New to the forum (and lutherie), skilled with CNC |
Have to warn you though, Jon, pretty gnarly bunch around here!
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|