Hello All,
I ran across this:
http://www.cambam.co.uk/
Looks to be a VERY decent CAM package, well documented, and FREE!
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| CamBam.... http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=26365 |
Page 1 of 1 |
| Author: | cyborgcnc [ Thu Mar 04, 2010 8:42 pm ] |
| Post subject: | CamBam.... |
Hello All, I ran across this: http://www.cambam.co.uk/ Looks to be a VERY decent CAM package, well documented, and FREE!
|
|
| Author: | npalen [ Fri Mar 05, 2010 6:31 pm ] |
| Post subject: | Re: CamBam.... |
Not sure how you would beat the price. |
|
| Author: | cyborgcnc [ Fri Mar 05, 2010 8:19 pm ] |
| Post subject: | Re: CamBam.... |
I was playing around with it last night...get this... It actually will let you import STRAIGHT G-code! Almost like a machine controller.... Just for that, it is worth installing! Nice to be able to see what the code looks like before you start cutting, and you happen not to be in front of your CNC machine.... 
|
|
| Author: | npalen [ Fri Mar 12, 2010 12:49 pm ] |
| Post subject: | Re: CamBam.... |
cyborgcnc wrote: Hello All, I ran across this: http://www.cambam.co.uk/ Looks to be a VERY decent CAM package, well documented, and FREE! I guess "FREE" just doesn't cut the mustard anymore. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|