| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| copper clad g10 http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=27771 |
Page 1 of 1 |
| Author: | pfour414 [ Thu Jun 10, 2010 11:05 am ] |
| Post subject: | copper clad g10 |
Hi, Does anyone know where I could find .125 thick copper clad (both sides) g10 in smaller quantities? After searching the internet, I found one company who sells it, but you have to buy 2 3' by 4' sheets, and that gets pretty expensive. The .125 thickness seems to make it much harder to find, but I need that thickness for what I am doing. Any ideas, tips appreciated. Evan |
|
| Author: | cyborgcnc [ Fri Jun 11, 2010 8:38 pm ] |
| Post subject: | Re: copper clad g10 |
Hi, Have you looked at mcmaster car? http://www.mcmaster.com/#grade-g-10-garolite/=7hqs7c They have many flavors, including different colors. G10 is great material, using it to build my quadcopters, and cuts like a dream on a cnc machine, with standard mills... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|