Just checking to see if I can figure this out.
Hopefully, there'll be a few pics of one of my CNC guitars.
Attachment:
BB2 - Fabrication (13).JPG
In process
.JPG)
Attachment:
BB2 Post Paint - JK (2).JPG
Attachment:
BB2 Post Paint - JK (7).JPG
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Testing http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=30744 |
Page 1 of 1 |
| Author: | Jeffkos [ Mon Jan 17, 2011 1:33 am ] |
| Post subject: | Testing |
Just checking to see if I can figure this out. Hopefully, there'll be a few pics of one of my CNC guitars. Attachment: BB2 - Fabrication (13).JPG In process Attachment: BB2 Post Paint - JK (2).JPG Attachment: BB2 Post Paint - JK (7).JPG
|
|
| Author: | npalen [ Mon Jan 17, 2011 9:22 pm ] |
| Post subject: | Re: Testing |
OK, Jeff, you're going to have to tell us about that first picture. Nelson Edit: Looks like one axis may have a bad hump in it. 
|
|
| Author: | turmite [ Tue Jan 18, 2011 10:40 am ] |
| Post subject: | Re: Testing |
Yeah, but I love that hump cause it carved a concave on the back that will fit my belly. Mike Jeff I think there is a rule here that says if this is your first post showing work, you have to post the cad model, gcode an all that stuff! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|