Official Luthiers Forum!

http://www.kelinginc.net/CNCmachines6090.html

Not looking to add this to the shop just yet, but probably within the next year or so. Any feedback? Good, bad or ugly? It gets some great reviews elsewhere (CNC forums) but I don't believe everything I read on the internet!

To me with these specs and about 5K shipped, it looks like a heck of a deal. Rigidly build and here are the specs:

Brand New CNC Router Engraving Machine with Mach3 Controller,
2.2 KW Spindle + 2.2KW Variable Frequency Drive

We changed this machine to Mach3 controlled Syetem.

Machine Size: 960 x 1320 x 1200 mm

Working size X,Y,Z : 600 x 900 x 150mm ( about 24" x 36 " x 6")

Working speed : 3m-8m/min

Resolution: 0.005mm (0.0002")

Mach3 Controller, with Mach3 Demo License software

Spindle: 2.2KW, Water-Cooled, ER20

Water Pump with Tank

Spindle Speed: 0-24000rpm with VFD, AC220V/50Hz


X, Y, Z axis driver: Stepper Motor Driver

X, Y Z Limit Switch

6 Axis Breakout Board Optical Isolated

E- Stop

Wood Packing Size: 1380 x 1090 x 1400 mm\

Any input is appreciated.