***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 9:42 am


Board index » CNC and Lutherie

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
cyborgcnc
PostPosted: Sat Feb 12, 2011 3:10 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Feb 05, 2008 10:08 pm
Posts: 224
Location: New York
Here is my solution to dust extraction...

http://www.youtube.com/watch?v=iFCLfV3Cs0Q

Works quite well so far.....

_________________
-CyborgCNC
http://www.cncguitar.com
https://www.facebook.com/CncGuitar
Top
 Profile  
 
npalen
PostPosted: Sat Feb 12, 2011 3:28 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 08, 2005 4:19 am
Posts: 1534
Location: United States
First name: Nelson
Last Name: Palen
That's a very clean and functional design. Gotta love those magnets.
The clear polycarbonate looks like it will allow viewing the cutter while working also.
Looks like an easy mod would be to turn the top plate 180 and bring the hose down behind the spindle if desired.
Nice work!
Top
 Profile  
 
Andy Birko
PostPosted: Sat Feb 12, 2011 5:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Jun 12, 2008 6:59 am
Posts: 1964
Location: Rochester Michigan
Have you used the one with the plastic flaps yet? I ask because it looks like they're so flexible that they'd get sucked into the port.

There's a guy who's selling a very similar product. He uses two layers of bristles near the vacuum port with the inner layer shorter than the outer layer to keep the bristles from getting sucked in.

You probably already know this but I'll say it just in case you don't - do not wear gloves when working with power tools! Very dangerous practice.

_________________
http://www.birkonium.com CNC Products for Luthiers
http://banduramaker.blogspot.com
Top
 Profile  
 
Brad Way
PostPosted: Sat Feb 12, 2011 5:09 pm 
Offline
Koa
Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States
Very nice work! I have been thinking abaout adding dust collection to my router and like your design.

_________________
Brad
Avon, OH
Top
 Profile  
 
turmite
PostPosted: Sat Feb 12, 2011 8:48 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 09, 2008 2:39 am
Posts: 519
Well all I can say is brillant! Love the magnets. I have built, installed, used and destroyed two different designs of dust hoods and now I have hope I might be able to make these work! Thank you for posting this.

Mike
Top
 Profile  
 
Glenn C Foster
PostPosted: Mon Feb 14, 2011 5:04 am 
Offline
Walnut
Walnut

Joined: Tue May 12, 2009 10:08 pm
Posts: 23
First name: Glenn
City: Sydney
Country: Australia
Focus: Build
Status: Amateur
Looks Great Cyborg! Nice work, very clean design! [:Y:]

Could be an interesting addition once finished on the cnc...hmm actually is a cnc ever finished? ;)

Cheers
Glenn
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » CNC and Lutherie

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 28 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com