| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| CNC MILL OR JUST ANOTHER ROUTER? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=31146 |
Page 1 of 1 |
| Author: | npalen [ Thu Feb 17, 2011 12:43 pm ] |
| Post subject: | CNC MILL OR JUST ANOTHER ROUTER? |
http://salecnc.com/catalog/product_info.php?products_id=147 This is more of what I would like to see in a CNC Router as far as possible rigidity and axes alignments? What do you guys think? (Outside of the fact that it's imported) Nelson |
|
| Author: | Bob Garrish [ Fri Feb 18, 2011 5:40 am ] |
| Post subject: | Re: CNC MILL OR JUST ANOTHER ROUTER? |
http://www.multicam.com/eng/Products/mtseries.html Moving tables are pretty common on pro-level routers. Seems slow for such a light machine, 240IPM is on the slow side for a 1/4" cutter at that spindle speed. Might be a good base for a retrofit with quality parts, though. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|