| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Anyone close to Southern California with a CNC router? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=32973 |
Page 1 of 1 |
| Author: | peterm [ Sun Jul 24, 2011 7:43 pm ] |
| Post subject: | Anyone close to Southern California with a CNC router? |
Need to have a couple of plywood jigs milled and would like to have them milled locally. It's kinda heavy so I rather not ship unless i don't have a choice. If anyone can handle a 22" by 30" area please leg me know. Thanks, |
|
| Author: | Parser [ Tue Jul 26, 2011 5:05 pm ] |
| Post subject: | Re: Anyone close to Southern California with a CNC router? |
Hi Peter, You might want to ask the cabinet shops in your area - some of these folks use CNC routers. You could also check for architectural millwork companies, or even boat builders (wooden kayaks and other small craft are commonly built using CNC cut parts). Good luck, Trev |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|