| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Anyone have any experience with KL-6090? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=33195 |
Page 1 of 1 |
| Author: | fingerstyle1978 [ Fri Aug 12, 2011 7:33 pm ] |
| Post subject: | Anyone have any experience with KL-6090? |
http://www.kelinginc.net/CNCmachines6090.html Not looking to add this to the shop just yet, but probably within the next year or so. Any feedback? Good, bad or ugly? It gets some great reviews elsewhere (CNC forums) but I don't believe everything I read on the internet! To me with these specs and about 5K shipped, it looks like a heck of a deal. Rigidly build and here are the specs: Brand New CNC Router Engraving Machine with Mach3 Controller, 2.2 KW Spindle + 2.2KW Variable Frequency Drive We changed this machine to Mach3 controlled Syetem. Machine Size: 960 x 1320 x 1200 mm Working size X,Y,Z : 600 x 900 x 150mm ( about 24" x 36 " x 6") Working speed : 3m-8m/min Resolution: 0.005mm (0.0002") Mach3 Controller, with Mach3 Demo License software Spindle: 2.2KW, Water-Cooled, ER20 Water Pump with Tank Spindle Speed: 0-24000rpm with VFD, AC220V/50Hz X, Y, Z axis driver: Stepper Motor Driver X, Y Z Limit Switch 6 Axis Breakout Board Optical Isolated E- Stop Wood Packing Size: 1380 x 1090 x 1400 mm\ Any input is appreciated. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|