Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

How is this for fitting a neck?
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=34022		 Page 1 of 1
Author:  cyborgcnc [ Tue Oct 25, 2011 10:04 pm ]
Post subject:  How is this for fitting a neck?
Well, did some more work on her tonight....fitted the neck to the body..Prrrrrfect!

I just love the assembly features of solidworks, like working in my shop, but doing it inside a computer!

bliss
Author:  Sheldon Dingwall [ Wed Oct 26, 2011 8:52 am ]
Post subject:  Re: How is this for fitting a neck?
Yeowza!
Author:  npalen [ Wed Oct 26, 2011 10:03 am ]
Post subject:  Re: How is this for fitting a neck?
Did you remember to leave some room for the VG?
Author:  cyborgcnc [ Wed Oct 26, 2011 11:21 am ]
Post subject:  Re: How is this for fitting a neck?
Excuse the ignorance...VG?? as in?
Author:  npalen [ Wed Oct 26, 2011 1:49 pm ]
Post subject:  Re: How is this for fitting a neck?
Virtual Glue :twisted:

P.S. Nice work!
Author:  cyborgcnc [ Wed Oct 26, 2011 2:11 pm ]
Post subject:  Re: How is this for fitting a neck?
LOL!!!

Good ONE!.. :lol:

I guess I will take care of that with a little bit of sandpaper after the CNC machine spits out the parts...
Author:  Bob Garrish [ Sun Oct 30, 2011 11:07 pm ]
Post subject:  Re: How is this for fitting a neck?
npalen wrote:
Virtual Glue :twisted:

P.S. Nice work!


Don't need to...CAD models fit together so tightly that the vacuum holds them together [:Y:]
Author:  npalen [ Thu Nov 03, 2011 10:24 am ]
Post subject:  Re: How is this for fitting a neck?
http://www.cnczone.com/forums/musical_instrument_design_construction/139442-bandsaw_accident_archtop.html
This is an interesting thread talking about carving integral braces via CNC.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/