| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Alibre cad/cam http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=38505 |
Page 1 of 1 |
| Author: | Caveys Clubs [ Mon Dec 10, 2012 11:57 pm ] |
| Post subject: | Alibre cad/cam |
Hi guys I have been useing the CADside. I have not figured out the CAM side it looks alot like rhino cam . How many guys are useing this product. At 200.oo bucks for a 3d cad/cam I am very happy. but I dont know if I want to spend the cash with out a littel reserch on a othere products . Any input would be great . |
|
| Author: | Andy Birko [ Tue Dec 11, 2012 8:53 am ] |
| Post subject: | Re: Alibre cad/cam |
Alibre CAM is an integrated version of VisualMill as is RhinoCam and VisualMill for SollidWorks. I have the plug in for solidworks, pro version, and like it a alot. In the lower versions, there's a lot of 3D stuff that's missing but I think there's enough to get by. If you contact them, they'll do a live demo with you over the phone. You can learn a lot about it that way. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|