Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

First fingerboard/inlay finished
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10106&t=44477		 Page 1 of 1
Author:  Kelby [ Sun Nov 02, 2014 11:24 pm ]
Post subject:  First fingerboard/inlay finished
This fingerboard was done completely on my CNC. It's my first significant CNC project (not including jigs, etc.). CNC did the profile, radius, fret slotting, and inlay. I learned a lot from it. On to the next thing!

Thanks to everyone for the advice along the way.

Attachment:
fretboard.jpg
Author:  Chris Pile [ Mon Nov 03, 2014 12:14 am ]
Post subject:  Re: First fingerboard/inlay finished
Wow. Has kind of a pinstriping vibe.
Author:  Kelby [ Mon Nov 03, 2014 12:49 am ]
Post subject:  Re: First fingerboard/inlay finished
Thanks, Chris. I'm building this one for my son, and "pinstriping" was the word he used to describe what he wanted.
Author:  dzsmith [ Tue Nov 04, 2014 7:57 pm ]
Post subject:  Re: First fingerboard/inlay finished
Dang, that's one pimped-out fretboard!
Author:  Glen H [ Tue Nov 04, 2014 8:37 pm ]
Post subject:  Re: First fingerboard/inlay finished
Nice!


Sent from my iPhone using Tapatalk
Author:  Parser [ Tue Nov 04, 2014 10:47 pm ]
Post subject:  Re: First fingerboard/inlay finished
Great work!

Trev
Author:  Kelby [ Tue Nov 04, 2014 11:54 pm ]
Post subject:  Re: First fingerboard/inlay finished
Thanks, everyone! This was a challenge in many ways. The biggest being that the lines are only .015" thick. But after a few broken bits and a fair amount of scrapped shell pieces, I was able to get it all in. CNC is awesome.
Author:  PeteFede [ Thu Nov 06, 2014 8:08 pm ]
Post subject:  Re: First fingerboard/inlay finished
Looks great!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/